On-line Workshop on Microflow Calibration Methods

November 18th, 2020 (Hosted by CETIAT, France) The up today progress on new and traceable calibration methods for measuring ultra low liquid flows, as developed within EMPIR MeDD II project, was presented during this on-line workshop. More than 70 participants attended the workshop and were informed about the new, innovative, state-of-the-art calibration methods based on [...]

2020-11-24T09:38:25+00:00November 24th, 2020|

The first deliverable of Project MeDD II is now available

REPORT: A1.2.5: Calibration methods for measuring the response or delay time of drug delivery devices using Newtonian liquids for flow rates from 5 nL/min to 100 nL/min Report available here: http://www.drugmetrology.com/meddii-d1_v1-2/

2020-10-12T10:57:22+00:00October 12th, 2020|

Online Workshop: Microflow Calibration Methods

November 18th, 2020 (9 a.m. - 13 p.m.) CET Within the scope of the MeDDII Joint Research Project, an online workshop on microflow calibration methods will be organized in November 2020. During the workshop the following topics will be presented: → The objectives of MeDDII project → The new methods, for calibration of micro flow [...]

2020-10-07T07:59:55+00:00October 6th, 2020|

MEDDII contributions to help fight COVID-19

The unprecedented conditions that Public Health Institutions are experiencing due to COVID-19 pandemic crisis has forced Hospital Administrations to take measures outside the usual work practicesin order to manage several challenges. Metrology can help with issues regarding drug infusion devices and their use. We release the following material to help outline the potential dangers and [...]

2020-05-18T10:20:55+00:00May 18th, 2020|

Measurement error: two opposite definitions

The determination of the measurement error in the procedure of the calibration of instruments and the application of the correction curve are crucial for traceable measurements. However, the definitions of the measurement error are opposite in the standards used in metrology and the medical standards (ex. IEC 60601-2-24:2012 used for medical electrical equipment). More information [...]

2020-05-12T07:25:43+00:00May 12th, 2020|

Two new papers published in the Journal of Flow Measurements and Instrumentation

The following papers were published in the Journal of Flow Measurement and Instrumentation, volume 73, June 2020. Development of an optical measurement method for “sampled” micro-volumes and nano-flow rates https://doi.org/10.1016/j.flowmeasinst.2020.101746Traceability of pulsed flow rates consisting of constant delivered volumes at given time interval https://doi.org/10.1016/j.flowmeasinst.2020.101729

2020-05-08T06:51:53+00:00May 8th, 2020|
Go to Top