Metaxiotou

About Zoe Metaxiotou

This author has not yet filled in any details.
So far Zoe Metaxiotou has created 27 blog entries.

Deliverable D3: “Validation report on the primary standards developed for the in-line measurement of the dynamic viscosity of Newtonian liquids with a target uncertainty of 2 % (k=2)”

Our Deliverable D3 Report entitled "Validation report on the primary standards developed for the in-line measurement of the dynamic viscosity of Newtonian liquids with a target uncertainty of 2 % (k=2)" is now published. It is available to download in the "Documents & Publications" submenu.  

2022-09-16T19:59:24+00:00September 16th, 2022|

New research papers published by MeDD II partners

Three (3) new research papers by MeDD II partners were published after peer review in several magazines. The complete articles can be downloaded here: https://drugmetrology.com/wp-content/uploads/2022/09/Front-track-method-IPQ.pdf https://drugmetrology.com/wp-content/uploads/2022/09/Rise-test-facilities.pdf https://drugmetrology.com/wp-content/uploads/2022/09/2022_CEPP_Cefoxitin_EV.pdf

2022-09-16T19:44:07+00:00September 16th, 2022|

Upcoming Medical Workshops hosted by NEL & CETIAT

Two Medical Workshops in English and French language, respectively, are both going to be held on September 8th, 2022. For detailed information, please, refer to the following links: Metrology for Drug Delivery (MeDDII) | TÜV SÜD (tuvsud.com) http://WEBINAIRE - SÉCURISER L'ADMINISTRATION DES MÉDICAMENTS PAR LA MESURE    

2022-08-25T11:27:44+00:00August 25th, 2022|

Training Workshop for Clinical/Medical Staff-June 21st, 2022 – Workshop material available

On the 21st of June a training course on Metrology for Drug Delivery was given online by IPQ. The event had 53 participants from hospitals and other medical institutions. Two presentations were given and are available here. https://drugmetrology.com/wp-content/uploads/2022/07/Formacao-MEDD-II-21-junho-2022_modulo-1_-1.pdf https://drugmetrology.com/wp-content/uploads/2022/07/Formacao-Metrologia-para-administracao-de-farmacos-modulo-II-1.pdf

2022-07-03T10:18:20+00:00July 3rd, 2022|

Training Workshop for Clinical/Medical Staff-June 21st, 2022

A training workshop on metrology for drug delivery will be organized by IPQ for clinical/medical staff and end users on 21st of June 2022, from 11 to 14 CET with the following programme. This workshop will be in Portuguese and is free of charge . You can register here. In September the same workshop will [...]

2022-06-12T10:48:16+00:00June 12th, 2022|

Deliverable D5 is published

MeDD II Deliverable D5 : “Design document for a new mechanically active on chip flow pump that will be integrated in a microfluidic device for use as a transfer standard in drug discovery and in organ on a chip applications for flow rates lower than 100 nL/min” Read the complete document here: https://drugmetrology.com/wp-content/uploads/2022/05/MeDD_II_Report_D5.pdf

2022-05-02T09:45:27+00:00May 2nd, 2022|

EURAMET News: EMPIR project supports the adoption of best practice flow metrology in standards

The knowledge, know-how and best practices established within EURAMET Drug delivery projects in the framework of EMPIR are disseminated in standardization through participation in several joint committees working on revision of important standards. The impact of this collaboration is described in detail in an article in EURAMET's official site. To read the detailed announcement, please, [...]

2022-04-10T15:21:19+00:00April 8th, 2022|

Project Deliverable D2-A1.3.5 approved

The Report on the results of the inter-comparison of the primary standards and improved measurement facilities for flow rates from 5 nL/min to 1500 nL/min (with uncertainty targets of 1 % (k=2) for steady flow and 2% (k=2) for fast changing flow) has been approved by MSU and is now available. Access the full report [...]

2022-02-14T06:59:25+00:00February 14th, 2022|
Go to Top